As we did in the notes we’ll break up the plate into \(n\) horizontal strips of width \(\Delta \,y\) and we’ll let each strip be defined by the interval \(\left[ {{y_{i - 1}},\,\,{y_i}} \right]\) with \(i = 1,2,3, \ldots n\). Finally, we’ll let \(y_i^*\) be any point that is in the interval and hence will be some point on the strip.

Below is yet another sketch of the plate only this time we’ve got a representative strip sketched on the plate. Note that the strip is “thicker” than the strip really should be but it will make it easier to see what the strip looks like and get all of the appropriate lengths clearly listed.

We’ve got a few quantities to determine at this point. To do that it would be convenient to have an equation for one of the sides of the plate. Let’s take a look at the side in the first quadrant. Here is a quick sketch of that portion of the plate.

Now, as noted above we have the top half of a diamond formed from a square and so we can see that the “triangle” formed in the first quadrant by the plate must be an isosceles right triangle whose hypotenuse is 2 and the two interior angles other than the right angle must be \(\frac{\pi }{4}\). Therefore, the bottom/left side of the triangle must be,

\[{\mbox{side}} = 2\cos \left( {\frac{\pi }{4}} \right) = \sqrt 2 \]

This means we know that the \(x\) and \(y\)-intercepts are \(\left( {\sqrt 2 ,0} \right)\) and \(\left( {0,\sqrt 2 } \right)\) respectively and so the equation for the line representing the hypotenuse must be,

\[y = \sqrt 2 - x\]

Okay, let’s get the various quantities in the figure.

We’ll start with \(x_i^*\) . This we can get directly from the equation above by acknowledging that if we are at \(x_i^*\) then the \(y\) value must be \(y_i^*\). In other words, plugging these into the equation and solving gives,

\[y_i^* = \sqrt 2 - x_i^*\hspace{0.25in}\hspace{0.25in} \to \hspace{0.25in}\hspace{0.25in}x_i^* = \sqrt 2 - y_i^*\]

Notice as well that the width of each strip in terms of \(y_i^*\) is then,

\[2x_i^* = 2\left( {\sqrt 2 - y_i^*} \right)\]

Next, let’s get \(D\). First we can see that \(D\) is the distance from the surface of the water to the \(x\)-axis in our figure. We know that the distance from the surface of the water to the top of the plate is 4 meters. Also, we found above that the top point of the plate is a distance of \(\sqrt 2 \) above the \(x\)-axis. So, we then have,

\[D = 4 + \sqrt 2 \]

Finally, the depth of each strip below the surface of the water is,

\[{d_i} = D - y_i^* = 4 + \sqrt 2 - y_i^*\] Show Step 3

We’ll assume that the strip is sufficiently thin so the hydrostatic pressure on the strip will be constant and is given by,

\[{P_i} = \rho g{d_i} = \left( {1000} \right)\left( {9.81} \right)\left( {4 + \sqrt 2 - y_i^*} \right) = 9810\left( {4 + \sqrt 2 - y_i^*} \right)\]

This, in turn, means that the hydrostatic force on each strip is given by,

\[\begin{align*}{F_i} = {P_i}{A_i} & = \left[ {9810\left( {4 + \sqrt 2 - y_i^*} \right)} \right]\left[ {\left( {2x_i^*} \right)\left( {\Delta \,y} \right)} \right]\\ & = \left[ {9810\left( {4 + \sqrt 2 - y_i^*} \right)} \right]\left[ {2\left( {\sqrt 2 - y_i^*} \right)\left( {\Delta \,y} \right)} \right]\\ & = 19620\left( {4 + \sqrt 2 - y_i^*} \right)\left( {\sqrt 2 - y_i^*} \right)\left( {\Delta \,y} \right)\end{align*}\] Show Step 4

We can now approximate the total hydrostatic force on plate as the sum off the force on each of the strips. Or,

\[F \approx \sum\limits_{i = 1}^n {19620\left( {4 + \sqrt 2 - y_i^*} \right)\left( {\sqrt 2 - y_i^*} \right)\left( {\Delta \,y} \right)} \]

Now, we can get an expression for the actual hydrostatic force on the plate simply by letting \(n\) go to infinity.

Or in other words, we take the limit as follows,

\[F = \mathop {\lim }\limits_{n \to \infty } \sum\limits_{i = 1}^n {19620\left( {4 + \sqrt 2 - y_i^*} \right)\left( {\sqrt 2 - y_i^*} \right)\left( {\Delta \,y} \right)} \] Show Step 5

Finally, we know from the definition of the definite integral that this is nothing more than the following definite integral that we can easily compute.

\[\begin{align*}F & = \int_{0}^{{\sqrt 2 }}{{19620\left( {4 + \sqrt 2 - y} \right)\left( {\sqrt 2 - y} \right)dy}}\\ & = \int_{0}^{{\sqrt 2 }}{{19620\left( {{y^2} - \left( {4 + 2\sqrt 2 } \right)y + 2 + 4\sqrt 2 } \right)dy}}\\ & = \left. {19620\left( {\frac{1}{3}{y^3} - \left( {2 + \sqrt 2 } \right){y^2} + \left( {2 + 4\sqrt 2 } \right)y} \right)} \right|_0^{\sqrt 2 } = \require{bbox} \bbox[2pt,border:1px solid black]{{96,977.9N}}\end{align*}\]